Home Page
 Products

  TELRAD
Phones
   Avanti
   16 Button
   Executive
   IP
Digital Equip
   IP Basic Systems
Voice Mail
Digital Cards
UNITeIP
Wireless Station

NEC UX5000


Contact Us


"We Buy & Sell

   Telrad & NEC UX5000

New & Refurbished"

CATcomm inc
danj@catcomm.com

800-651-6006
303-457-1660
303-255-8810 fax
 

Telrad Products - System and Station Options

Digital Cards (for use with all Digital Systems)

Part Number

Description

76-110-2900/0

ULD Digital Station Card

Accommodates * Digital Avanti stations (either Dual or Single Audio path).

76-110-2950/0

UHD Digital Station Half Card

Accommodates 8 digital Avanti stations (either Dual or Single Audio path).

76-110-1100/3

ELD - Digital Station Card

Accommodates 16 Digital stations with Single Audio Path or eight Digital stations with Dual Audio Path or a combination thereof. (Eight S-Buses).

76-110-1150/3

EHD - Digital Station Half Card

Accommodates eight Digital stations with Single Audio Path or four Digital stations with Dual Audio Path or a combination thereof. (Four S-Buses).

76-110-2200/6

ELA - Analog Station Card

Accommodates eight Telrad Analog stations. This card supports Station 10 phones with "masked" software, style M-2 or higher.

76-110-1700/8

SLD - Single Line Station Half Card

Accommodates eight single line sets (500 or 2500 type) and includes two DTMF receivers. Supports on and off premise stations and message waiting lamps. *

76-110-1730/0

SHD - Single Line Station Half Card

Accommodates four SLTs and includes two DTMF receivers and ringer module for these four ports only. Supports on and off premise stations. Does not support message waiting lamps.

76-210-2750/0

ONS2 - On Premise Single Line Card

16 port single line telephone card for on-premise extensions only. Includes two DTMF receivers.

Please Note: Requires separate module to light the message lamps on the connected stations. *

76-110-2700/1

ONS - On Premise Single Line Card

16 port single line telephone card for on-premise extensions only. Includes two DTMF receivers.

Please Note: Requires separate module to light the message lamps on the connected stations. *

76-210-2760/0

HONS2 - On Premise Single Line Half Card

8 port single line telephone card for on-premise extensions only. Includes two DTMF receivers.

Please Note: Requires separate module to light the message lamps on the connected stations. *

76-110-2720/6

HONS - On Premise Single Line Half Card

8 port single line telephone card for on-premise extensions only. Includes two DTMF receivers.

Please Note: Requires separate module to light the message lamps on the connected stations. *

*Requires Ring Generator - Part Number 76-110-1712/2

76-110-1712/2

Farnell Ring Generator

Ring generator for use when SLD, ONS, or HONS cards are used in the system.

76-120-1120/7

RS-232 Daughter Board for ONS/HONS

Provides RS-232 connection for SMDR output only.

76-110-1710/5

Power Dsine Ringer Module

For use with ONS and HONS card.

Note: When this ringer is installed, the message lamp module cannot be used on that specific ONS and HONS card

76-110-2750/8

Message Lamp Module

For use with ONS and HONS. Provides capabilities to light message waiting lamps for single line telephones installed on premise. One required per ONS or HONS card.

76-110-2750/8

Message Lamp Module

For use with ONS and HONS. Provides capabilities to light message waiting lamps for single line telephones installed on premise. One required per ONS or HONS card.

76-110-1200/2

COL - Trunk Card

Accommodates eight loop start C.O. trunks.

76-110-1250/9

CHL - Trunk Half Card

Accommodates four loop start C.O. trunks.

76-110-1220/7

COG - Trunk Card

Accommodates eight loop start or ground start trunks or any combination thereof.

76-110-1750/4

DID - Trunk Card

Accommodates eight Direct in Dial (DID) circuits. Includes two DTMF receivers.

76-110-2100/7

T1 - Trunk Card

Accommodates up to 24 voice channels. Compatible with Digital S-60, 128, and 400 systems of SB2 level software or higher only. Automatic Number Identification (ANI) requires Release 5 Level software or higher.

76-110-2300/5

E-1 - Trunk Card

For installation outside of the U.S. only. Accommodates up to 30 voice channels and two signaling channels. E1 is based on the European CCITT standard and is not supported by U.S. carriers.

76-110-2800/1

PRI 24

ISDN Primary Rate Interface (Custom Protocol). Accommodates 23 "B" channels and one "D" channel for use within the U.S.

76-150-2800/7

PRI 30

ISDN Primary Rate Interface (CCITT Protocol). Accommodates 30 "B" channels and two "D" channels for use outside the U.S.

76-110-2850/0

N12

Digital Networking Card - 11 B channels, 1 D channel Digital Networking Card for DPNSS.  Requires version 7.32 or higher.

76-110-2860/0

N24

Digital Networking Card - 23 B channels, 1 D channel Digital Networking Card for DPNSS.  Requires version 7.32 or higher.

76-120-2400/3

BRT - Basic Rate Trunk

ISDN compatible interface card. Accommodates four S-Bus and eight "B" channels for use within the U.S.

76-130-2400/1

BHT - Basic Rate Half Trunk

ISDN compatible interface card. Accommodates two S-Bus and four "B" channels for use within the U.S.

76-130-2450/9

BRS Card (Basic Rate Station - Europe)

ISDN compatible interface card. Accommodates four ports of 2B + D for Videoconferencing and ISDN Modem connections. (Based on European Standard)

76-110-1850/3

EMD - Tie Line Trunk Card

Accommodates either four 2 wire or two 4 wire E & M TIE lines.

76-110-1400/B

OCD2 - Option Card

One option card required for every three option modules added to the system.

76-110-1400/D

OCD - Option Card

One option card required for every three option modules added to the system.

76-110-1480/9

OAL Module

Open Architecture Link supports custom digital integration of third part voice processing equipment, e.g. voicemail, IVR, and CTI servers. Support four 2 wire audio channels. Includes two relays and two sensors to connect devices, such as Door Box, External Page, and External Bell.

76-OAL-0004/A

OAL Audio Adapter (4 Port)

Open Architecture Link Audio Adapter provides the line feed current required by PC-based telephony cards used in some third party voice processing equipment. Supports four 2 wire audio channels. Mounts externally and includes plug-in power adapter.

76-110-1410/8

MIM - Option Module

Includes four 2 wire audio channels, two relays and two sensors to connect devices, such as ImaGEN, Door Box, External Page, or External Bell.

76-120-1410/0

The Source 1 Module

MIM Module with special PAL chip. Required for Release 6 Meet-Me-Conference feature.

76-110-1470/1

Modem Option Module

Internal modem connection for remote administration.

Please Note: Does not require RS-232 connector. Maximum one per system.

76-210-1470/0

Modem 33.6

For Versions 5.07B and higher. Internal modem connectin for remote Administration.

Please Note: Does not require RS-232 connector. Max. one per system.

76-110-1260/6

RS-232 Card

Provides one RS-232 port in the system.

76-110-1430/2

DTMF Option Module

Provides four DTMF receivers. Maximum 17 receivers per Digital 128 system. Maximum 37 per Digital400 system.

For all other options, please call Catcomm at (800) 651-6006

top of page
Home ] Phones ] Avanti Phones  ] 16 Button ] Executive ] IP Telephones ] Vodavi ]



11587 Birch St
Thornton CO 80233

"We Buy & Sell

   Telrad & NEC UX5000

New & Refurbished"

CATcomm inc
danj@catcomm.com

800-651-6006
303-457-1660
303-255-8810 fax